Internal vibrator

2) Internal vibrator

Internal vibrators, also known as plug-in vibrators (vibrator), used for vibration cast foundation, columns, beams, walls and other structural members and play back volume of concrete foundation should be done slowly push pull. When using the plug-in vibrators tamped concrete, concrete vibrator should be inserted vertically, in order to make the upper and lower concrete seamed overall, concrete vibrator should be inserted in the lower 50mm. concrete vibrator china brand Vibrator moving pitch of not more than 1.5 times the radius of action; the vibrator from the template should not exceed 1/2 of the radius of the vibrator; shaker should be reinforced to avoid a collision, templates, core tubes, rings or embedded parts.

Five, 0.8m concrete vibrated use and maintenance:

1, after the installation of production shaking table test, must first drive (no load) 3 ~ 5min, after parking tighten all fasteners, repeated 2-3 times before production officially put into operation.
2, vibration table during manufacturing operations, placing concrete sample containing tryout must be symmetrical centerline of the table, so that load balancing.
3, vibration motor should have good reliable ground.
4, the vibration table in the production process, such as found in noise operation is not normal, should immediately stop production, cut off the power comprehensive inspection for loose fasteners. If necessary, to check the internal vibration motor eccentric block is loose or damaged parts. Tighten loose parts, replace damaged parts.
5, when the factory shaker vibration force is Electric Concrete Vibrator for Sale price properly adjusted. When servicing vibration motor, an eccentric position does not allow fast changes.

Six, 0.8m concrete vibration table accessories:

1, M16 anchor bolts, M16 nuts, washers oblique channel 16 with four each.
2, vibration isolation rubber pad 2.

Three, 0.8m concrete vibrated main structure:    

Shaking table consists of the table, Brace and vibration motor. Structure as shown in FIG. Countertops and undercarriage were all steel welded structure, with a certain rigidity. Hard rubber pad into the middle, which is movable table and fixed undercarriage damping between the support means from the vibration absorption effect. In the upper portion of the base chassis equipped with six locating pins at the bottom of the table with six locating holes to match, assurance activities located in the vibration table. Fixed to the bottom of the table in the active vibration motor is the use of bi-directional motor shaft at both ends of the shaft is fitted with the required excitement, giving the vibration table vibration. concrete table vibrator price Two eccentric block enclosed in the motor housing, has a simple structure, low noise advantages.

Supplier

Henan Dawson Machinery Co., Ltd. is a professional concrete machinery equipment supplier. From the company set up to now, our company has been committed to providing customers with professional concrete mixers, concrete mixing plant, concrete mixer truck, brick making,concrete mixer pumps and other equipment.For your dedicated service. Tel: 0086-371-86108022 Mobile: 15093371337 E-mall: sales2@cndasion.com Website: http://www.dasionvibrator.com