Brick technology security

Brick technology security 1, when the machine is running, must be installed on all shields and ground cover. 2, check the electrical portion of the ground wire to prevent leakage, short circuit and so on. 3, the motor direction is prohibited to hydraulic metal steel rule manual bending machine stand in order to avoid the car so. 4, found that the machine has not normal, should immediately stop checks excluded. 5, in the brick does not start, allowed to start feeding mechanism, so as to avoid overload, loss of billet mechanical phenomenon occurs. Installation Commissioning 1, the device should be installed on a level concrete foundation with anchor bolts. Brick commissioning Brick commissioning 2, the installation should pay attention to the main body vertical and horizontal. 3. After installation check all parts for loose bolts and host the doors are tight and, if requested to tighten. 4, according to the configuration of power equipment and power line control switch. 5, check is completed, the empty load test, test the normal production. Mianshaozhuanji Features Editor Mianshaozhuanji mixing tube by the ring gear, the work hot sale automatic steel bar straightening cutting machine forward stirring, reverse the material, you can mix plastic and semi-rigid concrete for general construction sites, roads, bridges, utilities and other projects and small concrete structures plant . Mianshaozhuanji reasonable structure, and has high production efficiency, good mixing quality, attractive appearance, easy to move, etc., is a more advanced model. Brick safe operation editor 1, the use of brick machine, must be placed in a solid place, with a stand or foot stable creel can not support the tire in place. 2, should be checked before each start Mianshaozhuanji clutch, brake, wire rope, etc. should be good, not a foreign body inside the drum. 3, note that the hopper is raised, the non-passage of any person or stay in the hopper, after the work is completed Mianshaozhuanji should hopper fixed then leave. 4, in the Mianshaozhuanji operation, the tool inserted into the inner cylinder is prohibited, to avoid accidents. 5, is prohibited without a license to operate, without great price cnc stainless steel bending machine leaving the job when the operation is prohibited. 6, brick machine maintenance, should be fixed well hopper off the power. 7, the operator must read the manual, are familiar with the working principle and working procedures, according to the requirements of operating equipment, non-professional operators must not be allowed to operate this equipment.