Steel cutting machine rules

Steel cutting machine rules

1, surrounded by steel cutter should have enough steel stacking space. 2, steel cutting machine rotating parts should shield. 3, should be checked for cracks cutter blades, blade mounting screws are tightened. 4, not allowed to use his hands concrete vibrator concrete poker vibration poker were holding the two ends of the shear reinforcement, except for hand-holding by the end of the bars around. 5, when working with both hands holding the bars, align the blade until the blade down and feel when pressed hand, immediately reinforced hard pressed to prevent the tail end tilt wounding. 6, prohibits cutting machine cutting diameter exceeds the specified steel and red-hot steel, when a plurality of steel cut off, shall be scaled section reinforced, timely adjustment of the blade, in order to prevent accidents. maintenance

(1) clean up the tool around parts and debris; (2) pay attention to check the motor, bearings, bushings and other fever cases, the temperature must not be greater than 300C, otherwise it should be repaired. (3) the need to protect the appearance of the machine, keep the surface clean and free of dirt and rust. (4) The machine must be sealed according concrete poker vibrator for sale china to the general provisions of the machine when not in storage method. Machine lubrication (1) must be regularly lubricating parts lubrication oil cup should be kept within the lubricating oil. Oil in the oil window Petroleum window should be within 1/4 to 3/4-wire oil window, the added oil must be filtered. The machine should start in the pipeline through the oil before. (2) lubricant materials, specifications lubrication method and time should be consistent with the provisions of Table II. (3) the machine should idle before the work 1 to 2 minutes, until the ram has a lubricating oil leaching only after normal use.

Blade of use

Steel cutting machine is mainly used for cutting blade diameter reinforced its equivalent carrier surface square steel, round, flat and angle steel and other profiles Ф6-40; this Machine new structure, small size, concrete vibrator flexible shaft price light weight, high efficiency, good performance, easy maintenance; mainly used in the construction industry.

specifications

Cutting bar diameter Φ6-40mm Cut the number of 40 times / min